What We Need for a Wire Harness Quote

Short answer: send a drawing (hand-drawn is fine) with connector and terminal part numbers, wire gauge, color and length for each circuit, plus the quantity. With that, we reply with a quote in 24 hours.

Custom wire harness built to a customer drawing

Wire Harness Quote Checklist

Use this list when you request a quote for a custom wire harness or cable assembly. If an item is still open, say so, and the quote will state what it assumes.

On this page:

ItemWhat to sendWhy it matters
DrawingHarness or cable drawing with dimensions and revision; hand-drawn is fineWe build to your drawing, so it defines the part
Components listConnector housing and terminal part numbers, seals, and whether equivalents are acceptableLets us price the exact parts; say whether equivalents are acceptable
Wiring diagramPin assignments for every connector, end to endPrevents mis-wiring and defines the continuity test
Wire specificationGauge (AWG), insulation material, color/stripe, UL style if requiredSets material cost; UL-certified wire adds a customization fee
LengthsLength of each circuit and branch, with toleranceLengths drive cutting and the harness layout
Covering and labelsBraided sleeve, heat shrink, tape, labels and wire markingsEach adds material and labor
Wire endsStrip length and end finish for any loose wire ends; shield or drain terminationDefines the end processing and how shielding is handled
ComplianceAny material or environmental requirements your product must meet (for example RoHS or REACH)We confirm in the quote what we can supply against them
PackagingBagging, carton labels or kitting requirementsAffects packing labor and carton count
TestsAnything beyond our standard visual, pull and continuity checksExtra tests are agreed before the order
QuantityFirst order quantity, any split deliveries, and expected yearly volumePrice depends on quantity
DeliveryTarget date and destinationUsed to plan the schedule and shipping

How to Prepare Your Wire Harness Drawing

A hand-drawn drawing is fine. Whatever format you use, include:

  1. Connector pin assignments, with the housing and terminal part numbers
  2. Wire color and stripe requirements, so each circuit is easy to identify
  3. Exact wire gauge (AWG) and insulation material
  4. Wire length for each circuit
  5. Exit direction at each connector (straight or 90°) if space is tight
  6. Shielding, and how the shield or drain wire is terminated, if EMI matters in your application
  7. Strip length and end finish for any loose wire ends
  8. Drawing number and revision, so the quote and sample match the right version

Generally we build directly to your drawing. If you need it, we can also provide our own drawing for you to confirm before production.

Connectors, Wire and Materials

  • If you name a wire brand and type, we follow it strictly. List the connector part numbers you need; we can build JST connectors with leads to your drawing.
  • UL-certified wire can be used; UL-certified cable adds a customization fee. The approval belongs to the wire, not to Wiringo.
  • Wire gauge and shielding can be customized to your requirement.
  • Black is the standard jacket color; custom colors can be matched to a Pantone number.
  • Braided sleeving and heat-shrink tubing can be added.
  • Labels and wire markings are added as requested.
  • Datasheets for the wire and cable used are available on request.

Quantity and Order Details

Price depends on quantity, so tell us how many you need for this order. If you expect repeat orders, add the expected yearly volume, so the quote can reflect it.

Also tell us the target delivery date and the destination, and any packaging or labeling requirements for the cartons. A sample is always made first for your confirmation before the batch.

Testing and Documents to Specify

Our standard checks are a visual inspection, including terminal crimp condition, a pull test and a continuity test. If you need more tests, tell us before the order so the details can be agreed.

Inspection reports and cable datasheets are available on request.

Can You Sign Our NDA Before We Send Drawings?

Yes. Send us your NDA before you send drawings. We review it, and if everything is OK, we sign it and send it back.

What Happens After You Send Your RFQ

  1. You send your drawing, components list and quantity.
  2. We reply with a quote in 24 hours.
  3. After you place the order, our factory reviews the drawing.
  4. If there are no problems, we purchase the materials.
  5. We make a sample and send it to you for confirmation.
  6. After you confirm the sample, we produce the rest of the batch.

The sample fee depends on how complex the drawing is. If a new mold is needed, the mold fee is listed separately in the quote, because the mold fee is paid before the sample is made.

Payment: T/T or PayPal (PayPal adds a 4% fee); payment terms are confirmed on the PI.

Lead time depends on order quantity and harness complexity; production is scheduled after payment is received.

Wire Harness Quote FAQ

Is a hand-drawn drawing OK for a quote?

Yes. A hand-drawn drawing is fine. Please add the connector and terminal part numbers, wire gauge and wire length for each circuit.

Why is the mold fee listed separately?

Because a sample is made before mass production, and the mold fee is paid before the sample is made, so it is shown as its own line in the quote.

How much does a sample cost?

The sample fee depends on how complicated the drawing is. We quote it together with your harness.

What payment methods do you accept?

T/T or PayPal (PayPal adds a 4% fee); payment terms are confirmed on the PI.

How long does production take?

Lead time depends on order quantity and harness complexity; production is scheduled after payment is received.

Related: custom wire harness manufacturing, custom cable assembly, prototype cable assemblies and the wire harness & cable assembly FAQ.

Get A QUICK QUOTE

Fill in your details and we’ll get back to you in 24 Hours.

contact us